Calibration/maintenance by Dräger certified and authorised service partner
Complete service including measurement protocol
A reliable and qualitative measurement with an alcohol measuring device can only be guaranteed if the device is regularly calibrated and serviced according to the manufacturer's specifications. This applies especially to the Dräger Interlock systems. As a rule, calibration should be checked annually. After the service interval has expired, the handset display shows the message: "Service due in X days".ADCS is specifically certified by Draeger to perform calibrations of Interlock devices. Our trained personnel can provide this service quickly and reliably. We service all current Dräger Interlock systems: the Dräger Interlock® XT, Dräger Interlock® 5000, Dräger Interlock® 7000 and the Dräger Interlock® 7500.
Feel free to contact us directly and make your appointment for maintenance at our premises:
ADCS GmbH & Co. KGHutmacherring 5D-23556 Lübeck
Phone: 0451-61917751
Dräger car charger 600 mA
The Dräger car charging cable can be connected to the 12 V vehicle electrical system. The charging unit is suitable for charging the NiMH batteries used in various Dräger Alcotest® models.
Dräger car charger is suitable for:
Alcotest® 6810
Alcotest® 6820
Alcotest® 6820 med
Alcotest® 7510Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Dräger Alcotest® 4000
The compact alcohol tester for private use
The Alcotest® 4000 from Dräger is exactly the right alcohol tester for private users or professional drivers who want to reliably test their driving ability. The compact device fits a trouser pocket and can therefore be carried along and used discreetly at any time. Nevertheless, you get an accurate and reliable result of the breath or residual alcohol value, because the measurement technology in the Alcotest® 4000 is identical in construction to devices used in high-precision breath alcohol tests by the police.The Alcotest® 4000 is ready for use in seconds and the breath alcohol test can be carried out immediately. The measuring function is operated via an illuminated function key. Signal tones can also be switched on to provide additional orientation. Navigation in the menu is via the same key.The attachable mouthpiece is hygienically protected by a cap. Exhaled air is guided through the air duct over the device and only a small sample is taken for evaluation. This ensures that there is no accumulation of alcohol in the device and the measurements remain reliable and precise. Important: a new mouthpiece must be used for each test person. Additional mouthpieces are available as accessories in the ADCS-Shop.
When ordering, please also remember to buy a sufficient quantity of mouthpieces! Click here for the matching mouthpieces.
Product features of the Dräger Alcotest® 4000 breathalyser:
Certified according to: EN 15964
Measuring range: 0.0 - 5.0 ‰
Electrochemical Dräger sensor
Graphic LCD display with backlight
Measuring mode: active
Backlit function key
Available in 12 languages
Data memory: 400 test results
Power supply: replaceable CR123A battery (1 pc.)
Weight: approx. 130 g (incl. battery)
Calibration after six months recommended. Our service team will be happy to help you.
Scope of delivery Dräger Alcotest® 4000:
Alcohol tester Dräger Alcotest® 4000
3 mouthpieces
Microfiber bag
Quick reference guide
Instruction manualManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Dräger Alcotest® 5000
The Dräger Alcotest® 5000 breath-alcohol tester allows for numerous tests in a very short time. With the Alcotest® 5000 you can test up to 12 people per minute. This is an enormous advantage, especially for large-scale police operations or entrance controls, for example at factory gates or in stadiums. In the event of a positive test result, exact per mille values can then be determined with appropriate alcohol testers if required.
In order to bridge a greater distance to a test subject, e.g. a lorry driver in his cab, the Alcotest® 5000 has a "¼" thread on the back of the device for attaching a standard selfie stick. This speeds up the sampling process. In addition, the Dräger Alcotest® 5000 eliminates the need to put on and take off new mouthpieces, as the alcohol test is performed without any physical contact with the test person, as a sample is simply blown into a funnel. The special funnel attachment of the Dräger Alcotest® 5000 prevents the back-flow of the subject's own expired air and the inhalation of any pathogens from previous test subjects and thus prevents the risk of possible infections of subsequent test persons. After use, the funnel attachment can be easily replaced, providing the assurance of a hygienic solution.
All measuring functions of the breathalyser can be conveniently controlled with one button. Two additional arrow buttons are used to navigate through the menu. For example, the last test results can be viewed or an individual language of the menu can be set. The instructions for the test procedure are visible on the display in a language-neutral manner by means of symbols. The Alcotest® 5000 can perform over 5,000 tests with just one set of batteries.
When ordering, please also remember to buy a sufficient quantity of mouthpieces! Click here for the matching mouthpieces.
Product features of the Dräger Alcotest® 5000 alcohol tester:
Measuring range: 0.0 - 2.5 mg/L (no display of the measuring result)
Electrochemical DrägerSensor®
Graphic LCD display with backlight
Measuring mode: active and passive
Measuring function with one button
Multilingual (8 languages)
Data memory: 500 test results with number, date and time
Power supply: Alkaline batteries (3 pcs.)
Weight: approx. 245 g (incl. funnel and batteries)
Calibration after 12 months. Our service team is happy to help you with this, please contact us!
Scope of delivery:
Alcotest® 5000 breath-alcohol tester
3 funnels
Microfibre pouch
3 alkaline batteries
Hand strap
Reference guideManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
This additional reflector film set is available for the Dräger Alcotest® 5000. The films increase the visibility of the breathalyser, for example in a dark car. The reflector films not only have a bright colour (available in yellow or orange), but also reflect the light, ensuring optimum visibility.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Protective cover for alcohol tester Dräger Alcotest® 5820
The cover for the Dräger Alcotest® 5820 offers additional protection against scratches and dirt. The breathalyser can be operated within the protective cover, since the display is visible at all times.
Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Dräger Alcotest® 6000 breathalyser
The Alcotest® 6000 from Dräger offers precise and fast breath alcohol analysis
The latest breathalyser from Dräger, the Alcotest® 6000 is a practical and handy device. The breathalyser is ready for use within seconds and the measurement can be conveniently carried out with the OK button. In addition to the active subject test, the Alcotest® 6000 also offers the possibility to measure alcohol in the ambient air. For this, the use of a mouthpiece is not necessary.
The Alcotest® 6000 alcohol tester has a proven electrochemical DrägerSensor® and is therefore characterised by short reaction times and great durability. With both active and passive measurement, the sensor delivers reliable results quickly - even with high alcohol levels.
Hygiene is a top priority for the Alcotest® 6000. The practical Slide'n'click system from Dräger allows the mouthpiece to be intuitively placed correctly and the mouthpiece to be removed easily. A spacer on the mouthpiece prevents direct lip contact of the test person with the device housing. During a measurement, the breath is not directed through the device, but past it. In addition, mouthpieces with non-return valve do not allow air to be sucked in. In addition, the test is carried out at a 90° angle between the user and the test person for additional hygienic safety.
The Dräger Alcotest® 6000 breath alcohol measuring device is ideally suited for authorities, private persons, industry and addiction facilities.
When ordering, please also remember to buy a sufficient quantity of mouthpieces! Click here for the matching mouthpieces.
Product features of the Dräger Alcotest® 6000 breathalyser:
Certified according to: EN 15964, FDA (depending on configuration).
Measuring range: 0.0 - 4.0 ‰
Electrochemical Dräger sensor
Graphic, two-colour LCD display with backlighting
Measuring mode: active and passive
Measuring function with one button
Menu navigation adjustable in three languages
Data memory: 500 test results
Power supply: CR123A battery
Connection option: Dräger Mobile Printer (BT)
Weight: approx. 150 g (incl. battery)
Calibration recommended after six months. Our service team will be happy to assist you, please contact us!
Scope of delivery Dräger Alcotest® 6000 breathalyser:
Breathalyser Alcotest® 6000
Reflective wrist strap
3 mouthpiecesManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Dräger Alcotest® 6820 carrying case
The convenient suitcase style carrying case offers room for the Alcotest® 6820 breath alcohol analyser, the power supply unit and mouthpieces. The carrying case can of course also be used for the Dräger Alcotest® 6820 med.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Dräger Alcotest® 7510 alcohol tester
The Dräger Alcotest® 7510 is a compact and robust alcohol tester. Its ergonomic shape makes the breathalyser suitable for both right- and left-handed users. The Dräger Alcotest® 7510 uses the latest Dräger sensor technology and the breathalyser features comprehensive data management and numerous configuration options. For example, it features a GPS module, so coordinates can be recorded for later analysis.The Dräger Alcotest® 7510 can be used at temperatures from -10 °C to +50 °C. The breath-alcohol setection device can be operated using the three-button concept. All measurements are controlled using a single button and menu navigation is possible using two additional buttons. The Dräger Alcotest® 7510 also has the option of passive sampling. The practical "Slide'n'Click" system from Dräger allows the mouthpieces to be changed easily and hygienically. The flexible data management of the Dräger Alcotest® 7510, the high memory capacity and the possibility of wireless data transfer to the Dräger Mobile Printer or a PC allow the breathalyser to be easily adapted to different requirements.
When ordering, please also remember to buy a sufficient quantity of mouthpieces! Click here for the matching mouthpieces.
Product features of the Dräger Alcotest® 7510 breathalyser:
Certified according to: EN 15964, FDA
Measuring range: 0.0 - 3.0 mg/L
Electrochemical Dräger sensor
Graphic LCD display with backlight
Measuring mode: active and passive
Simple three-button operation
Measured value storage: for up to 5000 test results
Standard setting: measuring unit in mg/L, language English
Power supply: AA alkaline batteries or NiMH rechargeable batteries
Connection possibility: Dräger Mobile Printer
Weight: 430 g (incl. batteries)Measuring range between 0.00 and 3.0 mg/L
Calibration after six months recommended. Our service team will be happy to help, please contact us!
Scope of delivery of the Dräger Alcotest® 7510 breathalyser:
Alcohol tester Dräger Alcotest® 7510
Transport case (black)
3 mouthpieces
USB cable
Product CD
Alkaline batteries
Hand strapManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Extension set "Mobile" for holster
The "Mobile" extension set for the Dräger Alcotest® 7510 consists of a belt loop, a cover flap and various fleece and hook straps. The set serves either as an extension for the IR module + holster or as a spare part for the holster set for the Alcotest® 7510.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Holster set Dräger Alcotest® 7510
The holster set for the Dräger Alcotest® 7510 breathalyser consists of a holster with belt loop, a cover flap and various fleece and hook straps (e.g. for fastening in a car). The alcohol tester can be operated from the holster.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
IR module Dräger Alcotest® 7510
The IR module from Dräger is an infrared interface attachment for the Alcotest® 7510 for data transfer. The attachment can be permanently connected to a PC via USB-cable. This eliminates the need to connect and disconnect the measuring instrument via USB-cable, as the infrared interface ensures wireless data transfer.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
IR module + holster Dräger Alcotest® 7510
The IR module and holster from Dräger is an infrared interface attachment for the Alcotest® 7510 for data transfer and holster. The attachment can be permanently connected to a PC via USB cable. Connecting and removing the USB cable to and from the measuring instrument is therefore not necessary, as the infrared interface ensures wireless data transfer. The IR module and holster serves as a supplement for stationary use in the charging cradle.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
System case Dräger Alcotest® 7510
The system case provides space accomodates the Dräger Alcotest® 7510 breathalyser and the Dräger Mobile Printer, mouthpieces, batteries, paper rolls, a charging cable, USB-cable and a keyboard. Data entry and printing are possible directly in the case.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
The Interlock® 5000/7000/7500 from Dräger consists of two components - handset and the control unit. In the handset the breath sample is analysed. The control unit releases or blocks the starter relay of the vehicle. Once the vehicle’s ignition is switched on, the Interlock® requests a breath test from the driver. If the device detects an alcohol value above the set limit, it prevents the engine from being started. The control unit is connected directly to the vehicle's electrical system under the dashboard.
Product features of the Dräger Interlock® 7500 control unit:
Control unit installed in the vehicle, 12 - 24 V
Suitable for following models:
Dräger Interlock® 5000
Dräger Interlock® 7000
Dräger Interlock® 7500Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Holder for handpiece Interlock® 5000/7000/7500
The Interlock® 5000/7000 or Interlock® 7500 from Dräger consists of two components - the handset and the control unit. For the handset, two different holders are available for fastening it in the driver's compartment. This is the holder "clip", in which the handset can be clicked in. In addition, an alternative holder is also available in which the handset can be inserted.
Suitable for the following models:
Dräger Interlock® 5000
Dräger Interlock® 7000
Dräger Interlock® 7500Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Holder for handpiece Interlock® 7500
The Interlock® 7500 from Dräger consists of two components - the handset and the control unit. For the handset, two different holders are available for fastening it in the driver's compartment. This is the holder "insertion" into which the handset is inserted. In addition, an alternative holder into which the handset is clicked is also available.
Suitable for the following models:
Dräger Interlock® 7500Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
The Interlock® 5000/7000 or Interlock® 7500 from Dräger consists of two components - the handset and the control unit. The spiral cable connects the handset with the control unit of the device. The cable is part of the scope of delivery, but is also available separately in two different lengths.
Suitable for the following models:
Dräger Interlock® 5000
Dräger Interlock® 7000
Dräger Interlock® 7500Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Dräger Mobile Printer
The Dräger Mobile Printer documents measurement results of the Alcotest® 6810, Alcotest® 6810 med, Alcotest® 6820, Alcotest® 6820 med and Alcotest® 7510 breathalysers. The device is operated via a single button. Changing the paper is simple. The Dräger Mobile Printer can be run with Alkaline or NiMH batteries.
Technical data:
Size: 110 mm x 60 mm x 205 mm (WxHxD)
Weight: approx. 400 g
Power supply: Batteries 4 x 1.5 V type alkaline (Mignon, LR6, AA) or rechargeable batteries 4 x 1.2 V type NiMH (Mignon, LR6, AA)
Scope of delivery:
Dräger Mobile Printer
Thermal printer paper, width 58 mm
Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Dräger thermal printer paper (25 years)
The printer paper rolls are suitable for the Dräger mobile printer for connection to Dräger respiratory carbon monitors. The printouts can be stored for up to 25 years. Width: 5.8 cm.
Printer paper suitable for the following models:
Dräger Mobile Printer
Scope of delivery:
5 rollsManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Dräger thermal printer paper (7 years)
The printer paper rolls are suitable for the Dräger mobile printer for connection to Dräger respiratory carbon monitors. The printouts can be stored for up to 7 years. Width: 5.8 cm.
Printer paper suitable for the following models:
Dräger Mobile Printer Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Scope of delivery:
5 rolls
The reflective wrist strap for the Dräger Alcotest® models offers improved handling of the alcohol tester through a more secure grip on the wrist.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Model D-type with non-return valve for breathalysers Dräger 7410/plus, EnviteC AlcoQuant 6020/plus and bluepoint AlcoTrue P/C
The mouthpiece is designed in such a way that it is impossible to regain air from the device. This is important to prevent the spread of infectious diseases. For example, during a series of measurements where different test candidates are to be tested, the risk of infection can be avoided.
The mouthpiece for the alcohol testers from Dräger, EnviteC and bluepoint AlcoTrue is intended for single use. A new mouthpiece should be used for each person and test - for hygienic reasons and to avoid faulty measurements due to residual alcohol in the mouthpiece. We recommend not to disinfect, wash out or otherwise clean and reuse the mouthpiece.
Product features:
Each mouthpiece individually hygienically packed.
Non-return valve prevents infectious diseases and manipulation attempts.
Each mouthpiece has a spacer on the mouthpiece. This prevents the lips of the test person from coming into contact with the instrument.
Suitable for the following breathalysers:
Dräger Alcotest 7410
Dräger Alcotest 7410 plus
DrägerAlcotest 3000 (only in combination with a separately available adapter)
EnviteC AlcoQuant 6020
EnviteC AlcoQuant 6020 plus
EnviteCAlcoQuant C
EnviteC AlcoQuant 3020
bluepoint AlcoTrue P
bluepoint AlcoTrue C
Packaging unit:
25 pieces in plastic bagManufacturer:
ADCS GmbH & Co. KG
Hutmacherring
5
23556
Lübeck
info@adcs-germany.com
Mouthpieces for the Dräger Interlock® XT
The package contains five mouthpieces for the Dräger Interlock® XT. Each mouthpiece is individually hygienically packaged. A spacer on the mouthpiece prevents the lips of the tested person from coming into contact with the housing of the breathalyser.
The mouthpiece is intended for single use, one new mouthpiece should be used per person.
Product features Mouthpieces for the Interlock® XT breathalyser:
Hygienic individual packaging.
The contour of the mouthpiece allows intuitively correct fitting.
This mouthpiece fits exclusively for the Dräger Interlock® XT.
Packaging unit:
Pack with 5 mouthpiecesManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Mouthpieces for the Dräger Alcotest® 3820/4000
The package contains five mouthpieces for the Dräger Alcotest® 3820 breathalyser or the Dräger Alcotest® 4000 breathalyser. Each mouthpiece is individually hygienically packed. A spacer on the mouthpiece ensures that the test person's lips do not come into contact with the measuring instrument housing. The mouthpiece is intended for single use, one new mouthpiece should be used per person.
Product features:
Hygienic individual packaging.
The shape of the mouthpiece allows intuitively correct positioning.
This mouthpiece fits exclusively for the Dräger Alcotest® 3820 and the Dräger Alcotest® 4000.
Packaging unit:
Package with five mouthpieces, individually packed.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Mouthpieces for Dräger Alcotest® 5000 alcohol tester
Instead of conventional mouthpieces, the Dräger Alcotest® 5000 breathalyser uses a funnel attachment with air outlets which prevents back-flow of expired air. This allows the funnel to be used for a number of test subjects without risk of infection.
Product features:
Hygienic individual packaging.
The shape of the mouthpiece allows intuitively correct positioning.
This funnel mouthpiece fits exclusively for the Dräger Alcotest® 5000
Packaging unit:
Package with 10 funnels.Manufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Mouthpieces for the Dräger alcohol testers Interlock® 5000/7000 and Interlock® 7500
The package contains five mouthpieces for the Dräger Interlock® 5000, Interlock® 7000 or the Interlock® 7500, each mouthpiece is individually hygienically packaged. A spacer on the mouthpiece ensures that the subject's lips do not come into contact with the meter housing. The mouthpiece is intended for single use; one new mouthpiece should be used per person.
Product features:
Hygienic individual packaging.
The shape of the mouthpiece allows intuitively correct positioning.
The mouthpieces are completely biodegradable.
This mouthpiece fits exclusively on the Dräger Interlock® 5000, Dräger Interlock® 7000 and Dräger Interlock® 7500.
Packaging unit:
Package with five mouthpiecesManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Mouthpieces for the Dräger alcohol testers Interlock® 5000/7000 and Interlock® 7500
The package contains five mouthpieces for the Dräger Interlock® 5000, Interlock® 7000 or the Interlock® 7500, each mouthpiece is individually hygienically packaged. A spacer on the mouthpiece ensures that the subject's lips do not come into contact with the meter housing. The mouthpiece is intended for single use; one new mouthpiece should be used per person.
Product features:
Hygienic individual packaging.
The shape of the mouthpiece allows intuitively correct positioning.
The mouthpieces are completely biodegradable.
This mouthpiece fits exclusively on the Dräger Interlock® 5000, Dräger Interlock® 7000 and Dräger Interlock® 7500.
Packaging unit:
Package with 3000 mouthpiecesManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Mouthpieces for the Dräger Alcotest® 7000 med with non-return valve
100 mouthpieces, individually hygienically packed
The "Alcomed" mouthpieces offer a special variant for medical use with the Dräger Alcotest® 7000 med. They meet the requirements of the MDR directive with regard to packaging and labelling.
The mouthpiece is designed in such a way that it is impossible for air to be reabsorbed from the device. This is important to prevent the spread of infectious diseases. For example, in a serial measurement where different test candidates are to be checked, the risk of infection can be reduced in this way.
The mouthpiece is intended for one-time use. A new mouthpiece must be used per person and test - for hygienic reasons and to avoid incorrect measurements due to residual alcohol in the mouthpiece. We recommend not to disinfect, wash or otherwise clean and reuse the mouthpiece.
Product features Alcomed mouthpieces:
Meets the requirement of the MDR directive
The contour of the Dräger "Slide'n'Click" mouthpiece allows intuitively correct fitting.
Non-return valve prevents infectious diseases.
A spacer on the mouthpiece prevents the lips of the tested person from coming into contact with the device.
The spacer can also be used as a mouthpiece ejector.
Suitable for the following Dräger Alcotest® models:
Dräger Alcotest® 7000 med
Packaging unit:
1 box with 100 mouthpieces, individually packedManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Mouthpieces for Dräger Alcotest models ("Slide'n'Click")
The Dräger mouthpiece is intended for single use. A new mouthpiece should be used per person and test - for hygienic reasons and to avoid faulty measurements due to residual alcohol in the mouthpiece. We recommend not to disinfect, wash out or otherwise clean and reuse the mouthpiece.
Product features:
The shape of the "Slide'n'Click" mouthpiece allows intuitively correct positioning.
The air outlet, which cannot be closed, prevents the possibility of tampering.
A spacer on the mouthpiece ensures that the subject's lips do not come into contact with the instrument.
The spacer can also be used as mouthpiece ejector.
The hygienically individually packaged mouthpieces can be easily placed on the measuring device.
Mouthpieces suitable for the following breathalysers:
Dräger Alcotest® 3000
Dräger Alcotest® 5510
Dräger Alcotest® 5820
Dräger Alcotest® 6000
Dräger Alcotest® 6510
Dräger Alcotest® 6820
Dräger Alcotest® 7000
Dräger Alcotest® 7510
Packaging unit:
1 box with 100 mouthpieces, individually packedManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Mouthpieces for Dräger Alcotest models ("Slide'n'Click")
The Dräger mouthpiece is intended for single use. A new mouthpiece should be used per person and test - for hygienic reasons and to avoid faulty measurements due to residual alcohol in the mouthpiece. We recommend not to disinfect, wash out or otherwise clean and reuse the mouthpiece.
Product features:
The shape of the "Slide'n'Click" mouthpiece allows intuitively correct positioning.
The air outlet, which cannot be closed, prevents the possibility of tampering.
A spacer on the mouthpiece ensures that the subject's lips do not come into contact with the instrument.
The spacer can also be used as mouthpiece ejector.
The hygienically individually packaged mouthpieces can be easily placed on the measuring device.
Mouthpieces suitable for the following breathalysers:
Dräger Alcotest® 3000
Dräger Alcotest® 5510
Dräger Alcotest® 5820
Dräger Alcotest® 6000
Dräger Alcotest® 6510
Dräger Alcotest® 6820
Dräger Alcotest® 7000
Dräger Alcotest® 7510
Packaging unit:
1 box with 1000 mouthpieces, individually packedManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Mouthpieces for Dräger Alcotest models ("Slide'n'Click") with non-return valve
The mouthpiece is designed in such a way that it is impossible to regain air from the instrument. This is important to prevent the spread of infectious diseases. For example, during a series measurement where different test candidates are to be tested, the risk of infection can be avoided.
The mouthpiece is intended for single use. A new mouthpiece should be used for each person and test - for hygienic reasons and to avoid faulty measurements due to residual alcohol in the mouthpiece. We recommend not to disinfect, wash out or otherwise clean and reuse the mouthpiece.
Product features:
The contour of the Dräger "Slide'n'Click" mouthpiece allows intuitively correct positioning.
Non-return valve prevents infectious diseases and manipulation attempts.
A spacer on the mouthpiece prevents the subject's lips from coming into contact with the measuring instrument.
The spacer can also be used as mouthpiece ejector.
The hygienically individually packaged mouthpieces can be easily placed on the measuring device.
Suitable for the following Dräger Alcotest® models:
Dräger Alcotest® 3000
Dräger Alcotest® 5510
Dräger Alcotest® 5820
Dräger Alcotest® 6000
Dräger Alcotest® 6510
Dräger Alcotest® 6820
Dräger Alcotest® 7000
Dräger Alcotest® 7510
Packaging unit:
1 box with 100 mouthpieces, individually packedManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Mouthpieces for Dräger Alcotest models ("Slide'n'Click") with non-return valve
The mouthpiece is designed in such a way that it is impossible to regain air from the instrument. This is important to prevent the spread of infectious diseases. For example, during a series measurement where different test candidates are to be tested, the risk of infection can be avoided.
The mouthpiece is intended for single use. A new mouthpiece should be used for each person and test - for hygienic reasons and to avoid faulty measurements due to residual alcohol in the mouthpiece. We recommend not to disinfect, wash out or otherwise clean and reuse the mouthpiece.
Product features:
The contour of the Dräger "Slide'n'Click" mouthpiece allows intuitively correct positioning.
Non-return valve prevents infectious diseases and manipulation attempts.
A spacer on the mouthpiece prevents the subject's lips from coming into contact with the measuring instrument.
The spacer can also be used as mouthpiece ejector.
The hygienically individually packaged mouthpieces can be easily placed on the measuring device.
Suitable for the following Dräger Alcotest® models:
Dräger Alcotest® 3000
Dräger Alcotest® 5510
Dräger Alcotest® 5820
Dräger Alcotest® 6000
Dräger Alcotest® 6510
Dräger Alcotest® 6810
Dräger Alcotest® 6820
Dräger Alcotest® 7000
Dräger Alcotest® 7510
Packaging unit:
1 box with 1000 mouthpieces, individually packedManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com
Power supply unit for Dräger Alcotest®
Original Dräger power supply unit for charging NiMH batteries in the Alcotest® 3000, 5520, 6510, 6810, 6820 and 6820 med models, as well as the Dräger Mobile Printer
Product details:
Plug-in power supply unit with four different adapters
Voltage: 100 - 240 V (50/60 Hz)
Weight: approx. 100 g
Colour: black
Power supply unit for Dräger Alcotest® suitable for:
Dräger Alcotest® 3000
Dräger Alcotest® 5520
Dräger Alcotest® 6510
Dräger Alcotest® 6810
Dräger Alcotest® 6820
Dräger Alcotest® 6820 med
Dräger Alcotest® 7510
Dräger Mobile PrinterManufacturer:
Dräger Safety AG & Co. KGaA
Moislinger
Allee 53-55
23558
Lübeck
www.draeger.com