Accessories Dräger

Statt 35,60 € nur noch 25,60 €

Aktuell im Angebot: FFP2-Maske Dräger X-plore 1720

Statt 35,60 € nur noch 25,60 €

Aktuell im Angebot: FFP2-Maske Dräger X-plore 1720

Jetzt kaufen

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Lithium Batterie

Lithium battery for Dräger breathalysers

Lithium battery for Dräger breathalysers Energy supply for the Dräger Alcotest® 3820, Alcotest® 4000, Dräger Alcotest® 5820 and Alcotest® 6000 models. Technical data: Lithium battery CR123A (CR17345) Nominal voltage: 3 V Nominal capacity: 1.4 Ah Dimensions (LxØ): 35x17 mm

€8.90*

Schutzhülle für Alkoholtester Dräger Alcotest® 5820

Dräger Alcotest® 5820 protective cover

Protective cover for alcohol tester Dräger Alcotest® 5820 The cover for the Dräger Alcotest® 5820 offers additional protection against scratches and dirt. The breathalyser can be operated within the protective cover, since the display is visible at all times.

€53.85*

Netzteil für Dräger Alcotest

Power supply unit for Dräger Alcotest®

Power supply unit for Dräger Alcotest® Original Dräger power supply unit for charging NiMH batteries in the Alcotest® 3000, 5520, 6510, 6810, 6820 and 6820 med models, as well as the Dräger Mobile Printer Product details: Plug-in power supply unit with four different adapters Voltage: 100 - 240 V (50/60 Hz) Weight: approx. 100 g Colour: black Power supply unit for Dräger Alcotest® suitable for: Dräger Alcotest® 3000 Dräger Alcotest® 5520 Dräger Alcotest® 6510 Dräger Alcotest® 6810 Dräger Alcotest® 6820 Dräger Alcotest® 6820 med Dräger Alcotest® 7510 Dräger Mobile Printer

€165.00*

Tip

Dräger Mobile Printer/Drucker

Dräger Mobile Printer

Dräger Mobile Printer The Dräger Mobile Printer documents measurement results of the Alcotest® 6810, Alcotest® 6810 med, Alcotest® 6820, Alcotest® 6820 med and Alcotest® 7510 breathalysers. The device is operated via a single button. Changing the paper is simple. The Dräger Mobile Printer can be run with Alkaline or NiMH batteries. Technical data: Size: 110 mm x 60 mm x 205 mm (WxHxD) Weight: approx. 400 g Power supply: Batteries 4 x 1.5 V type alkaline (Mignon, LR6, AA) or rechargeable batteries 4 x 1.2 V type NiMH (Mignon, LR6, AA) Scope of delivery: Dräger Mobile Printer Thermal printer paper, width 58 mm

€1,180.10*

Draeger-Kfz-Ladeeinheit

Car charger for Dräger breathalysers

Dräger car charger 600 mA The Dräger car charging cable can be connected to the 12 V vehicle electrical system. The charging unit is suitable for charging the NiMH batteries used in various Dräger Alcotest® models. Dräger car charger is suitable for: Alcotest® 6810 Alcotest® 6820 Alcotest® 6820 med Alcotest® 7510

€73.20*

Dräger Alcotest® 5000 reflector film set

Dräger Alcotest® 5000 reflector film set

This additional reflector film set is available for the Dräger Alcotest® 5000. The films increase the visibility of the breathalyser, for example in a dark car. The reflector films not only have a bright colour (available in yellow or orange), but also reflect the light, ensuring optimum visibility.

From €8.50*

Hand strap for Dräger Alcotest® models

Hand strap for Dräger Alcotest® models

The reflective wrist strap for the Dräger Alcotest® models offers improved handling of the alcohol tester through a more secure grip on the wrist.

€52.50*

Dräger Alcotest® leather pouch (black)

Dräger Alcotest® leather pouch (black)

The black leather case offers ideal protection for the Dräger Alcotest® breathalysers and can be fastened on a belt. Suitable for the following Alcotest® models: Dräger Alcotest® 3000 Dräger Alcotest® 6510 Dräger Alcotest® 6810 Dräger Alcotest® 6820 Dräger Alcotest® 6820 med

€75.90*

Dräger Alcotest 6820 Koffer

Dräger Alcotest® 6820 carrying case

Dräger Alcotest® 6820 carrying case The convenient suitcase style carrying case offers room for the Alcotest® 6820 breath alcohol analyser, the power supply unit and mouthpieces. The carrying case can of course also be used for the Dräger Alcotest® 6820 med.

€70.80*

Holsterset Dräger Alcotest 7510

Dräger Alcotest® 7510 holster set

Holster set Dräger Alcotest® 7510 The holster set for the Dräger Alcotest® 7510 breathalyser consists of a holster with belt loop, a cover flap and various fleece and hook straps (e.g. for fastening in a car). The alcohol tester can be operated from the holster.

€121.40*

Dräger Alcotest® 7510 IR module

Dräger Alcotest® 7510 IR module

IR module Dräger Alcotest® 7510 The IR module from Dräger is an infrared interface attachment for the Alcotest® 7510 for data transfer. The attachment can be permanently connected to a PC via USB-cable. This eliminates the need to connect and disconnect the measuring instrument via USB-cable, as the infrared interface ensures wireless data transfer.

€220.30*

Dräger Alcotest® 7510 extension set "Mobile"

Dräger Alcotest® 7510 extension set "Mobile"

Extension set "Mobile" for holster The "Mobile" extension set for the Dräger Alcotest® 7510 consists of a belt loop, a cover flap and various fleece and hook straps. The set serves either as an extension for the IR module + holster or as a spare part for the holster set for the Alcotest® 7510.

€82.40*

Systemkoffer Dräger Alcotest 7510

Dräger Alcotest® 7510 system case

System case Dräger Alcotest® 7510 The system case provides space accomodates the Dräger Alcotest® 7510 breathalyser and the Dräger Mobile Printer, mouthpieces, batteries, paper rolls, a charging cable, USB-cable and a keyboard. Data entry and printing are possible directly in the case.

€90.65*

Dräger Interlock® spiral cable

Dräger Interlock® spiral cable

The Interlock® 5000/7000 or Interlock® 7500 from Dräger consists of two components - the handset and the control unit. The spiral cable connects the handset with the control unit of the device. The cable is part of the scope of delivery, but is also available separately in two different lengths. Suitable for the following models: Dräger Interlock® 5000 Dräger Interlock® 7000 Dräger Interlock® 7500

From €86.60*

Dräger Interlock® holder I

Dräger Interlock® holder I

Holder for handpiece Interlock® 5000/7000/7500 The Interlock® 5000/7000 or Interlock® 7500 from Dräger consists of two components - the handset and the control unit. For the handset, two different holders are available for fastening it in the driver's compartment. This is the holder "clip", in which the handset can be clicked in. In addition, an alternative holder is also available in which the handset can be inserted. Suitable for the following models: Dräger Interlock® 5000 Dräger Interlock® 7000 Dräger Interlock® 7500

€28.75*

Dräger Interlock® Holder V

Dräger Interlock® Holder V

Holder for handpiece Interlock® 7500 The Interlock® 7500 from Dräger consists of two components - the handset and the control unit. For the handset, two different holders are available for fastening it in the driver's compartment. This is the holder "insertion" into which the handset is inserted. In addition, an alternative holder into which the handset is clicked is also available. Suitable for the following models: Dräger Interlock® 7500

€48.80*

Dräger Interlock® 7500 control unit

Dräger Interlock® 7500 control unit

The Interlock® 5000/7000/7500 from Dräger consists of two components - handset and the control unit. In the handset the breath sample is analysed. The control unit releases or blocks the starter relay of the vehicle. Once the vehicle’s ignition is switched on, the Interlock® requests a breath test from the driver. If the device detects an alcohol value above the set limit, it prevents the engine from being started. The control unit is connected directly to the vehicle's electrical system under the dashboard. Product features of the Dräger Interlock® 7500 control unit: Control unit installed in the vehicle, 12 - 24 V Suitable for following models: Dräger Interlock® 5000 Dräger Interlock® 7000 Dräger Interlock® 7500

€1,022.21*

Dräger Interlock® 7x00 module for mobile data transfer with antenna

Dräger Interlock® 7x00 module for mobile data transfer with antenna

The Dräger Interlock® 7500 consists of two components: the handset and the control unit. Before the engine is started, the meter prompts the driver to perform a breath test. Only after the test has been passed does the control unit release the vehicle's starter and the engine can be started. A module for mobile data transfer with antenna is also available for the Interlock® 7000. If such a module for mobile data transfer is legally required in the legislated Alcohol Interlock® Programme it can transfer data automatically to the responsible authority. Suitable for following moduls: Dräger Interlock® 7000 Dräger Interlock® 7500

€1,088.85*

Dräger Alcotest® 7510 IR module + Holster

Dräger Alcotest® 7510 IR module + Holster

IR module + holster Dräger Alcotest® 7510 The IR module and holster from Dräger is an infrared interface attachment for the Alcotest® 7510 for data transfer and holster. The attachment can be permanently connected to a PC via USB cable. Connecting and removing the USB cable to and from the measuring instrument is therefore not necessary, as the infrared interface ensures wireless data transfer. The IR module and holster serves as a supplement for stationary use in the charging cradle.

€277.50*

Dräger Thermodruckerpapier

Dräger thermal printer paper (7 years)

Dräger thermal printer paper (7 years) The printer paper rolls are suitable for the Dräger mobile printer for connection to Dräger respiratory carbon monitors. The printouts can be stored for up to 7 years. Width: 5.8 cm. Printer paper suitable for the following models: Dräger Mobile Printer Scope of delivery: 5 rolls

Content: 5 piece(s) (€4.16* / 1 piece(s))

€20.80*

Dräger thermal printer paper (25 years)

Dräger thermal printer paper (25 years)

Dräger thermal printer paper (25 years) The printer paper rolls are suitable for the Dräger mobile printer for connection to Dräger respiratory carbon monitors. The printouts can be stored for up to 25 years. Width: 5.8 cm. Printer paper suitable for the following models: Dräger Mobile Printer Scope of delivery: 5 rolls

Content: 5 piece(s) (€7.90* / 1 piece(s))

€39.50*

Tip

Dräger Mobile Printer BT

Dräger Mobile Printer BT

Dräger Mobile Printer BT The Dräger Mobile Printer BT is a Bluetooth® printer. It allows wireless printing with any compatible Dräger breathalyser - within a radius of up to 15 metres. You can attach the small and lightweight mobile printer to your belt using the clip. The printer is operated with only two buttons. The status of the device is indicated by illuminated symbols. Technical data Dräger Mobile Printer BT: Size: 9.6 mm × 114.2 mm × 44.3 mm (WxHxD) Weight: approx. 160 g Power supply: Lithium-ion batteries Suitable for Dräger breathalysers Alcotest® 6000, Alcotest® 7000, Alcotest® 7000 med

€547.40*

Dräger Printer Paper for Mobile Printer BT (10 years)

Dräger Printer Paper for Mobile Printer BT (10 years)

Dräger Printer Paper for Mobile Printer BT (10 years) The printer paper rolls are suitable for the Dräger Mobile Printer BT. Paper roll 40 mm; The printouts can be stored for up to 10 years.Width 5,8 cm. Printer paper suitable for the following models: Dräger Mobile Printer BT Scope of delivery: 5 rolls

Content: 5 piece(s) (€4.52* / 1 piece(s))

€22.60*

Dräger Printer Paper for Mobile Printer BT (25 years)

Dräger Printer Paper for Mobile Printer BT (25 years)

Dräger Printer Paper for Mobile Printer BT (25 years) The printer paper rolls are suitable for the Dräger Mobile Printer BT. Paper roll 40 mm; The printouts can be stored for up to 25 years.Width 5,8 cm. Printer paper suitable for the following models: Dräger Mobile Printer BT Scope of delivery: 5 rolls

Content: 5 piece(s) (€7.57* / 1 piece(s))

€37.85*

Carrying case Dräger Alcotest® 5000-7000

Carrying case Dräger Alcotest® 5000-7000

Carrying case Dräger Alcotest® 5000-7000 The practical transport case offers space for either the Alcotest® 5000, Alcotest® 6000 or Alcotest® 7000 breathalyser. The case also has space for mouthpieces.

€44.90*